Indlela emine yenkqubo yokuthutha + iNdlela yokuShutha kunye neSistim yokuShutha

151 iimbono

1.Umthengiiintshayelelo
I-shuttle yokugcina ebandayo kunyeinkqubo yokuhambisa i-shuttleiprojekthi eOstreliya.

2. Iprojekthioisishwankathelo

– Iphalethiubukhulu 1165 * 1165 * 1300mm
-1.2T
-195ipalethis kwiiindlela ezineinkqubo yothuthoindawo yokugcina impahla
-5 iindlela ezineisiphekephekes
-1 umphakamisi
-690iipalati kwiindawo yokugcina impahla ye-shuttle kunye ne-shuttle mover system
-5 iiseti zei-shuttle kunye ne-shuttle movers
-2 umphakamisis

Uyilo 

1-1

2-1

3-1

 

3. Indawo yokugcina impahla eshukumayo nesishukumayo

-Indawo yokugcina impahla yothutho kunye neyokuthutha (iipalati ezingama-690):
-Ukuphakama kwenqanaba yi-1762.5 mm.
-Indawo yokugcina impahla ekhenkcezisiweyo: -18~-20 degrees.
-Iisethi ezi-5 ze-shuttle kunye ne-shuttle movers, enye kwinqanaba ngalinye, ngaphandle kokutshintsha amanqanaba.
-Inqanaba lesibini nelesine lixhotyiswe ngamanqanaba olondolozo.
-Uxhotyiswe ngeziphakamisi ezi-2, yomba umngxuma obunzulu obuyi-150mm.
-Faka iintambo zokuhambisa ezishukumayo eholweni.
-Uphahla oluncinane lwenziwe ukuze lulungiswe.
-Ukusebenza kakuhle: Ngaphandle + ngaphakathi, iipalethi ezingama-30 ngeyure.

4-1

Yongeza inkqubo yokugaya ukuthintela abasebenzi ukuba bangene ngempazamo.Ukuba umntu uyapasa, inkqubo iya kucinywa.I-PLC yokhuseleko ezimeleyo iyafuneka.


4.F
indlela yethuindawo yokugcina impahla

-Indlela ezine yesistim yesistim yesistim (iipallet ezili-195)
-Ukuphakama kwenqanaba yi-1762.5 mm.
-Indawo yokugcina ifriji: -1 ukuya kwi-3 degrees.
-Iisethi ezi-5 zee-shuttles ezine, enye kwinqanaba ngalinye, ngaphandle kokutshintsha amanqanaba.
-Inqanaba lesibini nelesine lixhotyiswe ngamanqanaba olondolozo.
-Ixhotyiswe ngesiphakamisi esinye ukugrumba umngxuma onzulu oyi-150mm.
-Umgca wendlela ezimbini zokuhambisa.

5-1

Umqadi kufuneka wongezwe apha njengeleli.

6-1

I-Forklifts kufuneka ikwazi ukukhetha ngokuthe ngqo iimpahla apha.Musa ukuqwalasela imiba yokusebenza kakuhle kule ndawo.

5. Inkquboainzuzos
1) Ukucwangciswa okuhlakaniphile, akukho mfuneko yabasebenzi ukuba basebenzise izixhobo;
2) Inokuthi idibaniswe ne-shuttle, kwaye inokuphatha kunye nokuthutha iipallets;
3) iiyure ezingama-24 ngokuzenzekelayo ukusebenza kwebhetshi engaqhutywanga;
4) I-shuttleinokuhlawulwa kwi-intanethi ngexesha lokusebenza;
5) Umqhubi omnye we-shuttle kwinqanaba elifanayo lihambelana neeshuttles ezimbini okanye ngaphezulu ukuze zisebenze kunye;
6) Inkxaso ye-forklift ye-AGV ye-omnidirectional

7-1

Iprojekthihukukhanya
① Sebenzisa ngokupheleleyo indawo yokusebenzela, gqibezela ugcino olunoxinano oluphezulu, kwaye wandise izithuba zemithwalo;
② Inkqubo iguquguquka kakhulu, kwaye inani lee-shuttles linganyuswa okanye lincitshiswe ngokweemfuno zezithuthi zabathengi ukwandisa ukusebenza kakuhle;
③ Xhasa ukusebenza kweeshuttles ezininzi kwinqanaba elifanayo;
④ Umhambisi we-shuttle unikwe amandla ngomgca wetroli, kwaye inkqubo izinzile;I-shuttle inikwe amandla yi-super capacitor, enokuqonda ukusebenza okungaphazamisekiyo kweeyure ezingama-24.

8-1

9-1

 

 

 

 

I-NanJing Ulwazi Lwezixhobo ZokuGcina (iQela) Co.,Ltd

Imfonomfono: +8613636391926 / +86 13851666948

Idilesi: No. 470, Yinhua Street, Jiangning District, Nanjing Ctiy, China 211102

Iwebhusayithi:www.informrack.com

I-imeyile:lhm@informrack.com 

kevin@informrack.com


Ixesha lokuposa: Oct-17-2023

Silandele